3D Printing AlSi7Mg
Description
AlSi7Mg is a widespread, heat-treatable aluminum alloy that maintains a high mass-to-strength ration with good corrosion resistance for an aluminum alloy, ideal for applications requiring a combination of excellent thermal properties with low weight. Our 3D printing AlSi10Mg is a gas atomized powder with good flowability and spread ability, formulated for laser powder bed process. It is widely used in aerospace parts, automotive parts, profile surface spraying, and powder metallurgy.
General Information
Items | 3D Printing AlSi7Mg |
---|---|
Catalog | ACAM-3D-A036 |
Apparent Density | 1.35 g/cm3 |
Chemical Component
Al | Si | Mg | Cu | Ti | Fe | Mn | Zn |
---|---|---|---|---|---|---|---|
Balance | 6.5-7.5 | 0.4-0.7 | 0.2 max | 0.04-0.2 | 0.1 max | 0.1 max | 0.1 max |
* Unit: %, typical values
Typical Powder Properties
Items | 3D Printing AlSi7Mg |
---|---|
Nominal Particle Range | 20-63 µm (max 5% over and undersize) |
Hall Flow | 19 s/50 g |
* Other sizes can be customized
Mechanical Properties
Items | 3D Printing AlSi7Mg (Printed in Z-direction) | 3D Printing AlSi7Mg (Printed in X/Y-direction) |
---|---|---|
Tensile Strength | 400 MPa | 405 MPa |
Yield Strength (0.2%) | 220 MPa | 240 MPa |
Elongation | 9.6% | 13.5% |
Modulus of Elasticity | 69 GPa | 70 GPa |
* As-built, room temperature
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us