3D Printing CP-Ti (Grade 2)
Description
CP-Ti (commercially pure titanium) (Grade 2) is unalloyed. At service temperature it consists of 100% hcp alpha phase. As a single-phase material, its properties are controlled by chemistry (iron and interstitial impurity elements) and grain size. Our 3D printing CP-Ti (Grade 2) powder is specifically developed for LPBF (laser powder bed fusion) process. As a gas atomized powder with good flow, spread ability, high corrosion resistance and good biocompatibility, it is a good choice for chemical and frozen mechanical components as well as for applications in the medical and dental industries.
General Information
| Items | 3D Printing CP-Ti (Grade 2) |
|---|---|
| Catalog | ACAM-3D-A037 |
| Tap Density | 2.3-2.6 g/cm3 |
Chemical Component
| Ti | Fe | O | C | N | H |
|---|---|---|---|---|---|
| Balance | 0.08 max | 0.17 max | 0.03 max | 0.03 max | 0.01 max |
* Unit: %, typical values
Typical Powder Properties
| Items | 3D Printing CP-Ti (Grade 2) -1 | 3D Printing CP-Ti (Grade 2) -2 |
|---|---|---|
| Nominal Particle Range | 15-53 µm (max 5% over and undersize) | 45-106 µm (max 5% over and undersize) |
| Hall Flow | 29 s/50 g | 25 s/50 g |
* Other sizes can be customized
Mechanical Properties
| Items | 3D Printing CP-Ti (Grade 2) (Printed in X/Y-direction) |
|---|---|
| Tensile Strength | ≥ 345 MPa |
| Yield Strength | ≥ 275 MPa |
| Elongation | 20% |
* As-built, room temperature
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us