3D Printing Alloy 6
Description
Alloy 6 is a cobalt base superalloy consisting of a matrix containing dispersed carbides. It is a wear resistance alloy with excellent corrosion and mechanical properties up to 500 ℃. Processes of our 3D printing alloy 6 are run with Argon as atomization gas in a dust-free production environment to guarantee maximum product quality. Due to its excellent properties, it can be used in valves seals and gates, pump shafts and bearings, erosion shields and rolling couples. Furthermore, it is used in aero engines, gas turbines and the nuclear industry.
General Information
| Items | 3D Printing Alloy 6 |
|---|---|
| Catalog | ACAM-3D-A032 |
| Tap Density | 8.35 g/cm3 |
Chemical Component
| Co | C | Mn | Si | Cr | Ni | Mo | W | Fe |
|---|---|---|---|---|---|---|---|---|
| Balance | 0.9-1.4 | 1 | 1.5 | 27-31 | 3 | 1.5 | 3.5-5.5 | 3 |
* Unit: %, typical values
Typical Powder Properties
| Items | 3D Printing Alloy 6 -1 | 3D Printing Alloy 6 -2 |
|---|---|---|
| Nominal Particle Range | 20-53 µm (max 5% over and undersize) | 53-150 µm (max 5% over and undersize) |
* Other sizes can be customized
Mechanical Properties
| Items | 3D Printing Alloy 6 (Printed in X/Y-direction) |
|---|---|
| Tensile Strength | 1000 MPa |
| Yield Strength | 621 MPa |
| Elongation | 12% |
| Hardness, HRC | 36 |
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us