3D Printing AlSi10Mg
UNS A03600
Description
AlSi10Mg alloy is a typical aluminum-based alloy that offers good strength, hardness and dynamic properties, and is therefore used for parts subject to high mechanical loads. Different heat treatments can be applied to modify properties for example to increase ductility and conductivity. The material has good thermal and electrical conductivity especially after heat treatment. Our 3D printing AlSi10Mg is a gas atomized powder with good flowability and spread ability, formulated for laser powder bed process. It can be used in light weight structural components, manifolds, heat exchangers and others.
General Information
| Items | 3D Printing AlSi10Mg |
|---|---|
| Catalog | ACAM-3D-A034 |
| Apparent Density | 1.35 g/cm3 |
Chemical Component
| Al | Si | Mg | Fe | O |
|---|---|---|---|---|
| Balance | 10 | 0.35 | 0.15 | 0.02 |
* Unit: %, typical values
Typical Powder Properties
| Items | 3D Printing AlSi10Mg |
|---|---|
| Nominal Particle Range | 20-63 µm (max 5% over and undersize) |
| Hall Flow | 19 s/50 g |
* Other sizes can be customized
Mechanical Properties
| Items | 3D Printing AlSi10Mg (Printed in Z-direction) | 3D Printing AlSi10Mg (Printed in X/Y-direction) |
|---|---|---|
| Tensile Strength | 480 MPa | 460 MPa |
| Yield Strength | 240 MPa | 270 MPa |
| Elongation | 8% | 12% |
| Hardness, HV10 | -- | 124 |
* All tensile test bars are machined from cylindrical printed bars
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us