3D Printing CuNi2SiCr
UNS C18000
Description
CuNi2SiCr is a thermally curable low-alloyed copper material with high stiffness, also at elevated temperatures. It has good thermal and electrical conductivity. Due to the addition of nickel and silicon, this alloy has a high corrosion resistance, especially against stress-corrosion cracking. Processes of our 3D printing CuNi2SiCr are run with Argon as atomization gas in a dust-free production environment to guarantee maximum product quality. It is typically used in electromechanical components, brackets and fixing elements facing high stresses.
General Information
Items | 3D Printing CuNi2SiCr |
---|---|
Catalog | ACAM-3D-A030 |
Apparent Density | 4.1-4.6 g/cm3 |
Chemical Component
Cu | Ni | Si | Cr | Fe | Mn | Pb | Others, total |
---|---|---|---|---|---|---|---|
Balance | 2.0-3.0 | 0.5-0.8 | 0.2-0.5 | 0.15 max | 0.1 max | 0.02 max | 0.1 max |
* Unit: %, typical values
Typical Powder Properties
Items | 3D Printing CuNi2SiCr -1 | 3D Printing CuNi2SiCr -2 |
---|---|---|
Nominal Particle Range | 15-53 µm (max 5% over and undersize) | 45-105 µm (max 5% over and undersize) |
Hall Flow | 15 s/50 g | 20 s/50 g |
* Other sizes can be customized
Mechanical Properties
Items | 3D Printing CuNi2SiCr (As built) | 3D Printing CuNi2SiCr (Heat treated) |
---|---|---|
Tensile Strength | 314 MPa | 666 MPa |
Yield Strength | 260 MPa | 580 MPa |
Elongation | 36% | 18% |
Reduction of Area | 79% | 41% |
Young's Modulus | 98 GPa | 114 GPa |
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us