3D Printing Alloy 625
UNS N06625
Description
Alloy 625 is a nickel-chromium-molybdenum alloy with high strength, high toughness and excellent corrosion resistance. Our alloy 625 is a vacuum induction melted, argon gas atomized, and spherical powder for additive manufacturing. Its excellent machinability makes this alloy the preferred choice for chemical processing, aerospace and offshore applications. Some typical applications are, turbine engine components, fuel and exhaust systems, marine industry, chemical process equipment, pollution control, etc.
General Information
| Items | 3D Printing Alloy 625 |
|---|---|
| Catalog | ACAM-3D-A017 |
| Apparent Density | 4.2-4.4 g/cm3 |
Chemical Component
| Ni | Cr | Nb | Mo | C |
|---|---|---|---|---|
| Balance | 21 | 4 | 8.5 | 0.01 max |
* Unit: %, typical values
Typical Powder Properties
| Items | 3D Printing Alloy 625 -1 | 3D Printing Alloy 625 -2 | 3D Printing Alloy 625 -3 |
|---|---|---|---|
| Nominal Particle Range | ≤18 µm (max 5% over and undersize) | 15-45 µm (max 5% over and undersize) | 45-90 µm (max 5% over and undersize) |
| Hall Flow | -- | 15 s/50 g | -- |
* Other sizes can be customized
Mechanical Properties
| Items | 3D Printing Alloy 625 (Printed in Z-direction) | 3D Printing Alloy 625 (Printed in X/Y-direction) |
|---|---|---|
| Tensile Strength | 860 MPa | 970 MPa |
| Yield Strength | 620 MPa | 705 MPa |
| Elongation | 48% | 36% |
| IE Notch in Y/Z Direction | 190 J | 160 J |
| Hardness, HV10 | -- | 310 |
* No heat treatment
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us