3D Printing 410L
UNS S40977
Description
410L is a magnetic grade of stainless steel with major performance features of green strength and high compressibility. Considering the high content of ferrite stabilizer and low content of austenite stabilizer elements, it is easy to understand that the equilibrium phase composition at room temperature is ferritic phase. 304L is good choice to be used as a matrix in a metal matrix composite with nanoparticles dispersion for energy and high temperature applications. Our 3D printing 410L is a gas atomized, spherical powder for additive manufacturing applications. It is typically used for the selective laser fusing processes.
General Information
Items | 3D Printing 410L |
---|---|
Catalog | ACAM-3D-A006 |
Apparent Density | 4.1 g/cm3 |
Chemical Component
Fe | Cr | Ni | Si | C |
---|---|---|---|---|
Balance | 12.5 | 0.5 | 0.5 | 0.03 |
* Unit: %, typical values
Typical Powder Properties
Items | 3D Printing 410L -1 | 3D Printing 410L -2 |
---|---|---|
Nominal Particle Range | 20-53 µm (> 63 µm max 1%, < 20 µm max 2%) | 53-150 µm (max 5% over and undersize) |
Hall Flow | 16 s/50 g | -- |
* Other sizes can be customized
Mechanical Properties
Items | 3D Printing 410L |
---|---|
Tensile Strength | 923 MPa |
Yield Strength | 600 MPa |
Elongation | 17% |
* Printed in Z-direction
* After heat treatment at 1000 ℃ for 10 min, refined equiaxed grains and high fraction of martensitic phase are formed.
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us