3D Printing H11
UNS T20811
Description
H11 is a Cr-Mo-V alloyed hot work tool steel very good resistance to thermal shock and thermal fatigue after hardening and tempering exhibits. Our 3D printing H11 is a vacuum induction melted, argon gas atomized, and spherical powder for additive manufacturing. Due to its excellent high temperature strength, it is suitable for hot pressing tools, extrusion and casting dies. Due to the high wear resistance, the alloy is also well suited for cold working tools, such as hole punchers.
General Information
| Items | 3D Printing H11 |
|---|---|
| Catalog | ACAM-3D-A001 |
| Density | 4.0 g/cm3 |
Chemical Component
| Fe | Cr | Mo | V | Si | C | Mn |
|---|---|---|---|---|---|---|
| Balance | 5.1 | 1.3 | 0.4 | 1.0 | 0.37 | 0.35 |
* Unit: %, typical values
Typical Mechanical Properties
| Items | 3D Printing H11 |
|---|---|
| Nominal Particle Range | 15–45 µm (max 5% over- and undersize) |
| Hall Flow | 18 s/50 g |
* Other sizes can be customized
Heat Treatment
- Hardening at 1010–1030 ℃
- Tempering at 540–530 ℃
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us