3D Printing ST1
Description
ST1 is a blend powder of iron alloy powder (type ST0) with Cu powder. High presence of Mo (pre-alloyed with Fe) and Cu gives the homogeneous material with good performances after sinter tempering. Our 3D printing ST1 is produced through blending, homogenization, diffusion bonding and sieving processes. It is typically used in sintering of ferrous components with good mechanical performances where either thermal treatment or sinter-tempering is applied.
General Information
| Items | 3D Printing ST1 |
|---|---|
| Catalog | ACAM-3D-A014 |
| Apparent Density | 3.0-3.15 g/cm3 |
Chemical Component
| Fe | Cu | Mo | O |
|---|---|---|---|
| Balance | 2.0 | 1.5 | 0.15 |
* Unit: %, typical values
Typical Powder Properties
| Items | 3D Printing ST1 |
|---|---|
| Upper Cut Size | 180 µm (max 5% over and undersize) |
| Hall Flow | ~15 s/50 g |
* Other sizes can be customized
Mechanical Properties
| Items | 3D Printing ST1 (Printed in X/Y-direction) |
|---|---|
| Tensile Strength | ≥ 600 MPa |
| Yield Strength | ≥ 500 MPa |
| Elongation | ≥ 19% |
| Hardness, HV10 | ≥ 190 |
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us