Titanium Grade 3
UNS R50550
Description
Same as Titanium Grade 1 and Grade 2, Titanium Grade 3 is unalloyed titanium and commercially pure titanium grades. However, Titanium Grade 3 provides higher mechanical strength (typical yield strength is 462 MPa) compared with Titanium Grade 1 and Grade 2, while displaying similar ductility and formability with Titanium Grade 2 and showing similar corrosion stability with Titanium Grade 1 and Grade 2. Titanium Grade 3 features excellent strength-to-density ratio and excellent corrosion resistance. These make it suitable for the manufacture of components in weight-saving structures with reduced mass forces, and also for components requiring high corrosion resistance. In addition, it has improved strength, good weldability, moderate ductility, and outstanding weldability. Titanium Grade 3 is widely used in chemical industry, aerospace industry and medical engineering.
Chemical Component
Ti | Fe | O | C | N | H |
---|---|---|---|---|---|
Balance | 0.30% max | 0.35% max | 0.08% max | 0.05% max | 0.015% max |
Basic Information
Items | Titanium Grade 3 |
---|---|
Catalog | ACAM-Ti-P003 |
Density | 0.163 lbs/in3 (4.51 g/cm3) at 20 °C |
Specific Heat Capacity | 520 J/kg K at 20 °C |
Thermal Conductivity | 20 W/m K at 20 °C |
Modulus of Elasticity | 105 kN/mm2 at 20 °C |
Electrical Resistivity | 0.52 Ω mm2/m at 20 °C |
Material Forms
Alfa Chemistry offers Titanium Grade 3 in a variety of forms, including Sheets & Plates, Strip, Bars, Wire, Tubes, Pipes, Fittings, Forged & Cast Parts, Finished Part (Drawing).
Mechanical Properties
Conditions | 0.2% Yield Strength, N/mm2 | Tensile Strength, N/mm2 | Elongation, % | Hardness, HB |
---|---|---|---|---|
At 20 °C | ≥380 | ≥450 | ≥18 | ≤170 |
Specifications
- AMS 4900 - Sheet, strip, plate
- MIL-T-9046J CP2 - Sheet, strip, plate
- AMS-T-9046B CP2 - Sheet, strip, plate
- ASTM B265 - Gr3 Sheet, plate
- ASTM B337 - Gr3 Pipe (withdrawn)
- ASTM B338 - Gr3 heat exchanger tube
- ASTM B348 - Gr3 bar
- ASTM B367 - Gr3 castings
- ASTM B381 - Gr3 forgings
Applications
Titanium Grade 3 can be used in a variety of applications, including:
- Architectural components
- Automotive components
- General engineering
- Chemical and oil & gas applications
- Medical sector
- Airframe skin
- Aircraft structural
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us