Titanium Grade 1
UNS R50250
Description
Titanium Grade 1 is an unalloyed α phase titanium containing low oxygen and is one of four commercially pure titanium grades. Titanium Grade 1 is softest and most ductile of the titanium grades. Moreover, this grade material offers a variety of excellent properties. It has highest purity, excellent corrosion resistance, high formability, excellent weldability, and good impact properties at low temperatures. But it has lowest strength and is not age hardenable. Titanium Grade 1 can be produced in a deep draw quality as well as has a variety of surface conditions from bright to dull. The material can be used in architectural components, oil & gas, pharmaceutical and marine parts where the parts are subjected to very harsh environments.
Chemical Component
Ti | Fe | O | C | N | H | Others |
---|---|---|---|---|---|---|
Balance | 0.20% max | 0.18% max | 0.08% max | 0.03% max | 0.015% max | 0.10%max (each); 0.40% max (total) |
Basic Information
Items | Titanium Grade 1 |
---|---|
Catalog | ACAM-Ti-P001 |
Density | 0.163 lbs/in3 (4.51 g/cm3) |
Mean Coefficient of Thermal Expansion | 70-212 °F (20-100 °C): 4.78 x 10-6 in/in/°F (8.6 mm/m/°C) |
Thermal Conductivity | At 70 °F (21 °C): 111 BTU-in/h-ft-°F (16 W/m-°K) |
Modulus of Elasticity | 15.2 x 103 ksi (105 x 103 MP) in tension |
Melting Point | 3040 °F (1670 °C) |
Material Forms
Alfa Chemistry offers Titanium Grade 1 in a variety of forms, including Coil, Strip, Foil, Ribbon, Wire (Profile, Round, Flat, Square).
Mechanical Properties
Conditions | Ultimate Tensile Strength | Yield Strength (0.2% offset) | Elongation |
---|---|---|---|
Annealed (at room temperature) | 35 ksi min (240 MPa min) | 25-45 KSI (170-310 MPa) | 24% |
Additional Properties
Corrosion Resistance: This material offers high corrosion resistance in oxidising, neutral and mildly reducing media, including chlorides.
Heat Treatment: Titanium Grade 1 can only be hardened by cold work.
Welding: For best results refer to: SSINA's "Welding of Stainless Steels and Other Joining Methods".
Specifications
Coil, Strip, Foil, Ribbon, Wire (Profile, Round, Flat, Square): ASTM B265 GR1, ASTM F67
Applications
Titanium Grade 1 can be used in a variety of applications, including:
- Bellows
- Aircraft structural honeycomb
- Gaskets
- Aircraft skin
- Heat exchanger parts
- Deep drawing applications
- Implantable battery cathodes/connectors
- Stamped or etched fabrications
- Implantable battery cases/shields for CRM and neurostimulation devices
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us