Nitronic 30 Stainless Steel
UNS S20400
Description
Nitronic 30 is a high strength, abrasion resistant austenitic stainless steel that is part of a group of materials known as Nitronic® due to the addition of nitrogen to improve their strength. The nickel content of Nitronic 30 is among the lowest of all commercially-available austenitic steels. Nitronic 30 stainless steel offers essentially higher strength and annealed mechanical properties than those of typical austenitic grades such as 304 stainless steel. It's abrasion and impact resistance, combined with corrosion resistance made it a suitable material choice for a number of industrial applications requiring good resistance to aqueous and atmospheric corrosion resistance.
Chemical Component
Cr | Ni | Cu | Si | C | Mn | N |
---|---|---|---|---|---|---|
15.00-17.00% | 1.50-3.00% | 1.00% max | 1.00% max | 0.10% max | 7.00-9.00% | 0.15-0.30% |
Basic Information
Items | Nitronic 30 Stainless Steel |
---|---|
Catalog | ACMA-Fe-A028 |
Density | 0.284 lb/in3, 7.862 g/cm3 |
Electrical Resistivity, ohm-cm | At 68 °F (20 °C): 0.000102; At 797 °F (425 °C): 0.00014 |
Modulus of Elasticity, ksi (MPa) | 28 x 103 (193 x 103) in tension |
Magnetic Permeability, H = 200 | Annealed < 1.011 |
Material Forms
Alfa Chemistry offers Nitronic 30 stainless steel in a variety of forms, including Coil, Sheet, Strip, Ribbon, Wire.
Mechanical Properties
- Mechanical properties at room temperature properties: annealed typical
Ultimate Tensile Strength | Yield Strength | Elongation | Hardness |
---|---|---|---|
108 KSI (749 MPa) | 49 KSI (339 MPa) | 56% min | RB 89 |
- Mechanical properties at room temperature properties: tempered typical
Conditions | Ultimate Tensile Strength | Yield Strength | Elongation | Hardness |
---|---|---|---|---|
10% Cold Work | 124 KSI (856 MPa) | 78 KSI (539 MPa) | 44% | Re 23.5 |
20% Cold Work | 150 KSI (1038 MPa) | 101 KSI (696 MPa) | 29% | Re 34.5 |
30% Cold Work | 174 KSI (1204 MPa) | 137 KSI (948 MPa) | 20% | Re 39 |
40% Cold Work | 204 KSI (1411 MPa) | 173 KSI (1195 MPa) | 8% | Re 44 |
50% Cold Work | 204 KSI (1411 MPa) | 173 KSI (1195 MPa) | 8% | Re 44 |
60% Cold Work | 214 KSI (1478 MPa) | 184 KSI (1271 MPa) | 6% | Re 45 |
Additional Properties
Corrosion Resistance: Refer to NACE (National Association of Corrosion Engineers) for recommendations.
Heat Treatment: Nitronic 30 stainless steel is non hardenable by heat treatment.
Welding: For best results refer to: SSINA's "Welding of Stainless Steels and Other Joining Methods".
Specifications
Coil, Sheet, Strip, Ribbon, Wire: ASTM A240, ASTM A666
Applications
- Coal handling equipment: screens, chute liners, buckets.
- Well screens, mixing tanks, hose clamps.
- Mining equipment.
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us