Cupronickel (with Zn) C75200
UNS C75200
Description
C75200 is a copper-nickel alloy formulated for primary forming into wrought products. As it is offering a combination of strength, ductility and moderately high work-hardening rate, C75200 is widely used as both a deep drawing and spring alloy. In addition, C75200 is an excellent choice for designers considering both functional and decorative applications. Due to the high Ni content, C75200 has similar appearance to stainless steel which makes it valuable in applications, such as costume jewelry, flatware, nameplates, and zippers.
General Information
Items | C75200 |
---|---|
Catalog | ACAM-Cu-A122 |
Density | 8.73 g/cm3 |
Melting Point | 1070 ℃ |
Chemical Component
Cu | Fe | Pb | Mn | Ni | Zn |
---|---|---|---|---|---|
63.0-66.5 | 0.25 max | 0.05 max | 0.5 max | 16.5-19.5 | Balance |
* Unit: %
Typical Mechanical Properties
Items | C75200 |
---|---|
Tensile Strength | 386-710 MPa |
Yield Strength (depending on temper) | 172-621 MPa |
Elongation at Break ( in 76.2 mm) | 45% |
Elasticity Modulus | 117 GPa |
Poisson's Ratio | 0.34 |
Machinability (C36000 (free-cutting brass) = 100) | 20 |
Shear Modulus | 47 GPa |
Fabrication Properties
Technique | Suitability |
---|---|
Brazing | Excellent |
Butt Weld | Good |
Capacity for Being Cold Worked | Excellent |
Capacity for Being Hot Formed | Poor |
Coated Metal Arc Welding | Not Recommended |
Gas Shielded Arc Welding | Fair |
Machinability Rating | 20 |
Oxyacetylene Welding | Good |
Seam Weld | Fair |
Soldering | Excellent |
Spot Weld | Good |
Material Forms
Alfa Chemistry offers copper-nickel-zinc alloy C75200 in a variety of forms, including Wire, Rod, Bar, Plate, Sheet, Strip, etc.
Applications
Typical application of C75200 alloy include:
- Consumer: holloware, musical instrument parts, radio dials, name plates, hollow ware, costume jewelry, camera parts, bows, table flat ware, zippers
- Fasteners: screws, rivets
- Industrial: truss wire, base for silver plate, core bars, templates, etching stock
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us