Beryllium Bronze C17300
UNS C17300
Description
Beryllium bronze C17300 is heat treatable, ductile and can be mill hardened. It is an age-hardened alloy having developed higher strengths. Its age-hardening response depends on the factors of time, temperature, and cold work applied to the metal. By either under-aging or over-aging during the precipitation hardening process its many properties (toughness, fatigue strength, corrosion resistance, etc.) can be modified and controlled. C17300 is suitable for applications requiring good conductivity, high strength and stiffness.
General Information
Items | C17300 |
---|---|
Catalog | ACAM-Cu-A002 |
Density | 8.25 g/cm3 |
Melting Point | 866 ℃ |
Chemical Component
Cu(1) | Al | Pb | Be | Co(2) | Si |
---|---|---|---|---|---|
Balance | 0.20 max | 0.2-0.6 | 1.8-2.0 | 0.2-0.6 | 0.2 |
* Unit: %
(1) Cu value includes Ag
(2) Ni + Co 0.2% min, Ni + Fe + Co 0.6% max.
Typical Mechanical Properties
Items | C17300 |
---|---|
Hardness, Rockwell B | 80.0 - 85.0 |
Tensile Strength, ultimate | 515 - 585 MPa |
Tensile Strength, yield | 275 - 345 MPa |
Elongation at Break | 15.0 - 30.0% |
Modulus of Elasticity | 125 - 130 GPa |
Poisson's Ratio | 0.3 |
Machinability (UNS C36000 (free-cutting brass) = 100%) | 20% |
Shear Modulus | 50.0 GPa |
Fabrication Properties
Technique | Suitability |
---|---|
Soldering | Good |
Brazing | Good |
Oxyacetylene Welding | Not Recommended |
Gas Shielded Arc Welding | Good |
Coated Metal Arc Welding | Good |
Spot Weld | Good |
Seam Weld | Fair |
Butt Weld | Fair |
Capacity for Being Cold Worked | Excellent |
Capacity for Being Hot Formed | Good |
Forgeability Rating | 0 |
Machinability Rating | 50 |
Common Fabrication Processes
- Blanking
- Drawing
- Tapping
- Turning
- Forming and Bending
- Drilling
Material Forms
Alfa Chemistry offers beryllium bronze C17300 in a variety of forms, including Wire, Rod, Bar, Sheet, Strip, Plate, Tube.
Applications
Typical uses of beryllium bronze C17300 include:
- Electrical/electronic connectors
- Current-carrying springs
- Precision screw machined parts
- Corrosion resistant components
- Welding electrodes
- Bearings
- Plastic molds
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us