Arsenic Brass C26130
UNS C26130
Description
Arsenic Brass C26130 is a 70:30 copper-zinc alloy with a trace quantity of arsenic as a corrosion inhibitor. The mechanical properties are unaffected by the arsenic addition, but its corrosion resistance is greatly improved. C26130 is sometimes referred to as 'DR' or dezincification resistant brass. C26130 consists of the face centered cubic alpha phase and has the optimum combination of strength and ductility in the copper-zinc series. As its good ductility, it can be readily formed by all conventional methods.
General Information
Items | C26130 |
---|---|
Catalog | ACAM-Cu-A099 |
Density | 8.5 g/cm3 |
Melting Point | 915 ℃ |
Chemical Component
Cu | Fe | Pb | As | Zn |
---|---|---|---|---|
69.0-71.0 | 0.05 max | 0.05 max | 0.02-0.06 | Balance |
* Unit: %
Typical Mechanical Properties
Items | C26130 |
---|---|
Hardness, HV | 80 (max) |
Tensile Strength | 280-350 MPa |
Elongation at Break | 40% |
* Annealed seamless tubes.
Fabrication Properties
Technique | Suitability |
---|---|
Soldering | Excellent |
Brazing | Excellent |
Oxy Acetylene Welding | Good |
Gas Shielded Arc Welding | Fair |
Coated Metal Arc Welding | Not Recommended |
Resistance Welding (Spot) | Good |
Resistance Welding (Seam) | Good |
Capacity for Being Cold Worked | Excellent |
Capacity for Being Hot Worked | Fair |
Hot Working Temperature | 725 – 850 °C |
Annealing Temperature | 375 – 650 °C |
Stress Relieving Temperature | 250 – 300 °C |
Machinability Rating | 30% of free cutting brass |
Polishing/Electroplating Finish | Excellent |
Material Forms
Alfa Chemistry offers arsenic brass C26130 in a variety of forms, including Wire, Strip, Bar, Sheet, Plate, Rod, Tube, Shapes, etc.
Applications
Arsenic Brass C26130 alloy is used for heat exchangers, plumbing tube and fittings, drain & vent pipes and other applications requiring excellent corrosion resistance in waters.
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us