Aluminum Bronze C61300
UNS C61300
Description
Aluminum Bronze C61300 is a highly ductile wrought aluminum bronze containing 2.5% iron, which facilitates added strength and acts as a grain refiner. C61300 also contains a small addition of tin, which helps to increase its corrosion resistance. Besides, it is a material that is high strength. Due to these properties, C61300 is mainly produced for sea water applications and is also used in water condensing systems.
General Information
Items | C61300 |
---|---|
Catalog | ACAM-Cu-A028 |
Density | 7.89 g/cm3 |
Melting Point | 1040 ℃ |
Chemical Component
Cu(1) | Pb | Sn | Zn | Fe | P | Ni(2) | Al | Mn | Si |
---|---|---|---|---|---|---|---|---|---|
Balance | 0.01 max | 0.2-0.5 | 0.1 max | 2.0-3.0 | 0.015 max | 0.15 max | 6.0-7.5 | 0.2 max | 0.1 max |
* Unit: %
(1) Cu value includes Ag
(2) Ni value include Co
Typical Mechanical Properties
Items | C61300 |
---|---|
Tensile Strength | 540 MPa |
Yield Strength | 240 MPa |
Elongation at Break | 35.00% |
Reduction of Area | 25.00% |
Izod Impact | 54.0 - 66.0 J |
Fatigue Strength | 180 MPa |
Shear Modulus | 44.0 GPa |
Elastic Modulus | 117 GPa |
Poisson's Ratio | 0.34 |
* O60 Temper
Fabrication Properties
Technique | Suitability |
---|---|
Soldering | Not Recommended |
Brazing | Fair |
Oxyacetylene Welding | Not Recommended |
Gas Shielded Arc Welding | Excellent |
Coated Metal Arc Welding | Good |
Spot Weld | Good |
Seam Weld | Good |
Butt Weld | Good |
Capacity for Being Cold Worked | Good |
Capacity for Being Hot Formed | Good |
Forgeability Rating | 50 |
Machinability Rating | 30 |
Material Forms
Alfa Chemistry offers Aluminum bronze C61300 in a variety of forms, including Wire, Rod, Bar, Sheet, Strip, Plate, Tube, Bolts, Nuts, Screws, Studs, Pins, Washers, Rings, Springs, etc.
Applications
Typical applications of Aluminum Bronze C61300 include:
- Building: wire screening, fasteners, bolts, nuts
- Industrial: heat exchanger tube, seamless tubing and pipe, tube sheets, columns, sea water piping, mining shovels, tie rods, condenser tube, water boxes, corrosion resistant vessels, machine parts, piping systems, acid resistant, gaskets, tanks, desalination equipment
- Marine: marine hardware, protective sheathing ordnance, mixing troughs, blending chambers
- Others: ball valve seats
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us