Aluminum Bronze C61000
UNS C61000
Description
Aluminum Bronze C61000, also known as CA102, consists of copper with about 6.0-8.5% of aluminum. It possesses high strength and elasticity in air, fresh water, sea water and certain acid conditions. It also has high corrosion resistance and can be hot and cold pressure processed, electric welded and gas welded, but it's not easy to be brazed. It is widely used in architecture, fasteners and many other industries.
General Information
Items | C61000 |
---|---|
Catalog | ACAM-Cu-A027 |
Density | 7.78 g/cm3 |
Melting Point | 1041 ℃ |
Chemical Component
Cu(1) | Pb | Zn | Fe | Al | Si |
---|---|---|---|---|---|
Balance | 0.02 max | 0.20 max | 0.50 max | 6.0-8.5 | 0.10 max |
* Unit: %
(1) Cu value includes Ag
Typical Mechanical Properties
Items | C61000 |
---|---|
Hardness, Rockwell B | 85 |
Tensile Strength, Ultimate | 550 MPa |
Tensile Strength, Yield | 380 MPa |
Elongation at Break (in 50 mm) | 25% |
Modulus of Elasticity | 117 GPa |
Poissons Ratio | 0.33 |
Machinability (C36000 (free-cutting brass) = 100%) | 20% |
Forgeability | 70% |
Shear Modulus | 44.0 GPa |
* H04 Temper
Fabrication Properties
Technique | Suitability |
---|---|
Soldering | Fair |
Brazing | Not Recommended |
Oxyacetylene Welding | Not Recommended |
Gas Shielded Arc Welding | Good |
Coated Metal Arc Welding | Good |
Spot Weld | Good |
Seam Weld | Fair |
Butt Weld | Good |
Capacity for Being Cold Worked | Good |
Capacity for Being Hot Formed | Good |
Forgeability Rating | 70 |
Machinability Rating | 20 |
Material Forms
Alfa Chemistry offers Aluminum bronze C61000 in a variety of forms, including Wire, Rod, Bar, Sheet, Strip, Plate, Tube, Bolts, Nuts, Screws, Studs, Pins, Washers, Rings, Springs, etc.
Applications
Typical applications of Aluminum Bronze C61000 include:
- Architecture: decorative applications
- Fasteners: bolts
- Industrial: tie rods, welding wire, shafts, pump parts, overlay on steel for wearing surface
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us