AISI 1010
UNS G10100
Description
AISI 1010 is a low-carbon alloy with about 0.10% carbon content. The steel has good formability and weldability while it has relatively low strength but it can be quenched and tempered to increase strength. It is recommended for sheet stock for deep-drawing operations and in sheet and stock for structural shapes and carburized parts. Among its many applications are bushings, clutch discs, flanges, thrust washers, tinplate, nails, rivets, automobile bodies and fenders, pans and transmission cover.
Chemical Component
| Fe | Mn | S | P | C |
|---|---|---|---|---|
| 99.18-99.62% | 0.30-0.60% | ≤0.050 % | ≤0.040% | 0.080-0.13% |
Basic Information
| Item | AISI 1010 |
|---|---|
| Catalog | ACMA-Fe-A055 |
Properties
| Properties | Metric | Imperial |
|---|---|---|
| Tensile Strength | 365 MPa | 52900 psi |
| Yield Strength (Depending on Temper) | 305 MPa | 44200 psi |
| Elastic Modulus | 190-210 Gpa | 27557-30458 ksi |
| Bulk Modulus (Typical for Steel) | 140 GPa | 20300 ksi |
| Shear Modulus (Typical for Steel) | 80.0 GPa | 11600 ksi |
| Poisson's Ratio | 0.27-0.30 | 0.27-0.30 |
| Elongation at Break (In 50 Mm) | 20% | 20% |
| Reduction of Area | 40% | 40% |
| Hardness, Brinell | 105 | 105 |
| Hardness, Knoop (Converted From Brinell Hardness) | 123 | 123 |
| Hardness, Rockwell B (Converted From Brinell Hardness) | 60 | 60 |
| Hardness, Vickers (Converted From Brinell Hardness) | 108 | 108 |
| Machinability | 55 | 55 |
Material Forms
Sheet & Plate
| Production Route | Hot rolled, cold rolled |
| Material Standard | AISI, ASTM, ASME, DIN, BS, EN, ISO, JIS, GOST, SAE, IS & Custom Chemistry |
| Size | Width from 100 mm to 3000 mm; Length from 500 mm to 12000 mm |
| Thickness | 0.1 mm to 400 mm |
| Delivery Condition | As rolled, annealed, quenched and tempered, normalized |
| Surface Finish | Plain, brushed, cladded |
Equivalent Grade / Specifications
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
| |
|
|
|
Applications
- Structures in buildings, bridges, railway stations
- Fabrication of pipeline components & industrial equipment
- Construction of automotive bodies, warehouses, shipping containers
- Commercial appliances, etc.
* Technical data included herein should be used as a guideline only, and should not be construed as maximum or minimum values for specification or for final design, or for a particular use or application. The data may be revised anytime without notice.
You Want It? We Got It!
Alfa Chemistry is a manufacturer of standard & custom specialty metals & alloys. We stock a wide variety of alloys in different shapes and specifications. If you can't find the product or specification you need, please contact us directly.
Contact Us